Austin (318) 348-4317
Hudredfold Services
Light Fixture Installation Without the Guesswork

Family-owned · Austin Local

Light Fixture Installation Without the Guesswork

Hundredfold Services installs ceiling fixtures, pendants, vanity lights, and more throughout the Dallas metro.

Call now(318) 348-4317
Call (318) 348-4317Request an estimate

Free estimate

Tell us what you need

Three fields. It reaches a person here, not a call centre.

No obligation · Responds within 1 business day

By submitting this form you agree that we may contact you about your request and share your details with partner companies for marketing purposes.

Light Fixture Installation That Goes Smoothly

Most homeowners don't need an electrician to install a light fixture. They need someone who shows up with the right tools, knows how to read a junction box, and doesn't leave a mess on the way out. That's the job Dominique Willis handles at Hundredfold Services. Whether you're swapping a builder-grade fixture for something that actually fits your room, adding a pendant over a kitchen island, or replacing a flickering fixture that's been on your list for months, call 318-348-4317 and we'll get it scheduled.

What affects the time and scope on a light fixture install? The main factors are the existing wiring condition, ceiling height, fixture weight, and whether a mounting bracket needs to be replaced or reinforced. A simple flush-mount swap in a room with good existing wiring is a short job. A heavy chandelier over a two-story foyer with no existing support brace is a different conversation. We scope it before we start so there are no surprises mid-job. Hundredfold also handles fan installation if you're updating multiple fixtures in the same visit, which keeps the trip count down and the cost in check. Every job is different -- contact Hundredfold Services for an accurate estimate.

What Fixture Types We Install

01

Ceiling and Flush-Mount Fixtures

The most common swap we handle. Old fixture comes down, we check the box and wiring, new fixture goes up. If the mounting hardware doesn't match, we sort it out on the spot rather than leaving you with a half-installed light.

02

Pendant and Chandelier Lights

Heavier fixtures need a rated junction box and sometimes a ceiling medallion or brace. We verify the box can handle the load before anything gets hung. A fixture that isn't properly supported is a safety problem, not just an aesthetic one.

03

Vanity and Bathroom Bar Lights

Bathrooms have moisture considerations and the switch wiring is often routed differently than a bedroom. We've seen enough bathroom installs to know where the shortcuts show up and why they cause problems later.

04

Outdoor and Porch Fixtures

Exterior fixtures need weatherproof boxes and sealed connections. A loose gasket on an outdoor light lets water in over time. We set these right the first time so you're not pulling the fixture back off in six months.

05

Under-Cabinet and Accent Lighting

Low-profile and plug-in accent lights are straightforward. Hardwired under-cabinet lighting involves more routing, but it's a clean finish that cord-and-plug setups can't match. We can talk through which approach makes sense for your kitchen.

Our Process

How a Fixture Install Actually Works

  1. 01

    We Assess Before We Touch Anything

    First step is checking the existing box, the wiring gauge, and how the circuit is run. If something's off before we start, you'll know about it before a single screw turns.

  2. 02

    The Old Fixture Comes Down Clean

    We cap and tape existing wires, check the mounting surface, and clear out any old hardware that won't work with the new fixture. No prying, no scratched ceilings.

  3. 03

    New Fixture Goes Up Right

    We match the wiring, secure the mounting bracket to the box, and confirm the fixture is level before we power it back on. You flip the switch and it works. That's the whole job.

Good to Know

Do You Need a Licensed Electrician for This?

Honestly, for most standard fixture swaps the answer is no. Replacing a like-for-like fixture on an existing circuit -- same box, compatible wiring, standard fixture weight -- falls within what a skilled handyman handles every day. Where you cross into licensed electrician territory is new circuit runs, panel work, or adding wiring where none exists. Hundredfold stays in our lane. If we open something up and see a wiring issue that's beyond a fixture swap, we'll tell you straight and point you toward the right resource. We're not going to tell you everything looks fine when it doesn't. For jobs that are clearly in scope, we handle the full electrical work side of the swap so you're not coordinating two separate people for one visit.
pendant and chandelier lights work, professional service in Austin, TX

Every Visit

What Comes With Every Fixture Install

  1. 01

    Junction box check before anything gets hung

  2. 02

    Mounting hardware matched to the new fixture

  3. 03

    Wiring connected and tested before we leave

  4. 04

    Area cleaned up once the job is done

Pair Your Fixture Install With Other Work

ceiling and flush mount fixtures work, professional service in Austin, TX
Most people who call about a fixture install have a second or third thing on their list. A ceiling fan in the bedroom, a vanity light in the guest bath, maybe a bathroom faucet that's been dripping since spring. Hundredfold is set up to handle that list in one visit, which is the whole point of an owner-operated service. Dominique shows up, you walk through what needs doing, and we work through it. You're not scheduling a separate fan installation visit or waiting on a different crew for a minor plumbing fix. One call, one trip, more done. That's how Hundredfold works.

Serving Homeowners Across the Dallas Metro

Hundredfold Services installs light fixtures throughout the Dallas metro and surrounding suburbs. Wherever you are in the area, call 318-348-4317 to get scheduled.

  • Dallas
  • Fort Worth
  • Plano
  • Frisco
  • McKinney
  • Allen
  • Richardson
  • Garland
  • Mesquite
  • Irving
  • Arlington
  • Grand Prairie
  • Carrollton
  • Lewisville
  • Denton
  • Flower Mound
  • Southlake
  • Grapevine
  • Cedar Hill
  • DeSoto

Ready to Get That Fixture Off Your List?

Call Dominique at Hundredfold Services and we'll get it scheduled.

Call (318) 348-4317 Call to Book Your Install

Frequently asked questions

How much does it cost to have someone install a light fixture?
The cost depends on fixture type, ceiling height, whether the existing junction box needs to be replaced, and how many fixtures you're having done in one visit. A standard flush-mount swap on an accessible ceiling with solid existing wiring is a relatively short job. A heavy chandelier on a high ceiling with a box that needs reinforcing takes longer. We don't publish flat rates because the variables matter too much. Every job is different -- contact Hundredfold Services for an accurate estimate.
Do you need a licensed electrician to install a light fixture?
Not for most standard fixture replacements. Swapping a fixture on an existing circuit with compatible wiring and a properly rated junction box is work a skilled handyman handles every day. Where you need a licensed electrician is new circuit installation, panel work, or running wiring to a location that doesn't already have it. Hundredfold is clear about where our scope ends, and we'll tell you if a job crosses that line before we start.
What if the junction box in my ceiling can't support the new fixture?
Older homes especially run into this. A standard box is typically rated for 35 to 50 pounds. Heavier pendants and chandeliers need a fan-rated or brace-mounted box. We check the existing box before the new fixture goes up. If it needs to be replaced or reinforced, we handle that as part of the install rather than leaving you with a fixture that's hung on hardware that can't hold it.
Can you install multiple light fixtures in one visit?
Yes, and it's the most efficient way to do it. If you've got a fixture for the dining room, one for the hallway, and a vanity light for the guest bath, doing them in a single visit saves you a separate scheduling window for each one. We'll walk through the full list at the start and work through them in order. If you also need a ceiling fan swapped, we can fold that fan installation into the same visit.
What should I have ready before the installer arrives?
Have the new fixture out of the box and accessible. If there's furniture directly under the install point, move it or let us know so we can plan around it. If the fixture requires a specific bulb type -- like a candelabra base or a specific wattage -- check that you have the right bulbs before we arrive so the light is fully operational when we leave. Beyond that, just knowing which breaker controls the room helps speed things up.
What's the difference between a fixture swap and a new fixture installation?
A swap replaces an existing fixture in a location that already has a junction box and wiring in place. A new installation means running wiring to a spot that doesn't currently have power. Fixture swaps are the most common job we handle. New installations involve more work and, depending on the circuit situation, may require a licensed electrician for the wiring portion. We'll tell you which one your job is after a quick look.

Related