Austin (318) 348-4317
Hudredfold Services
Custom Staircase Construction and Installation That Fits Your Home

Family-owned · Austin Local

Custom Staircase Construction and Installation That Fits Your Home

From new stair builds to full replacements, Hundredfold Services handles the whole job.

Call now(318) 348-4317
Call (318) 348-4317Request an estimate

Free estimate

Tell us what you need

Three fields. It reaches a person here, not a call centre.

No obligation · Responds within 1 business day

By submitting this form you agree that we may contact you about your request and share your details with partner companies for marketing purposes.

Staircase Construction and Installation Services

Staircase construction and installation is one of those jobs where the details matter more than most homeowners realize. The cost of installing a new staircase varies widely depending on materials, height, configuration, and whether the structure is replacing something existing or going into a new opening entirely. What you can count on: Dominique Willis at Hundredfold Services will walk through the scope with you, give you a straight answer on what's involved, and not pad the project. Call (318) 348-4317 and get an honest conversation about your staircase before anyone picks up a tool.

A well-built staircase isn't just about how it looks from the bottom of the steps. Rise, run, tread depth, structural support underneath, how the newel posts are anchored, whether the stringer sits flush against the wall framing, all of it matters, and shortcuts in any one spot create problems that compound over time. Jobs range from straightforward single-flight replacements on homes with standard layouts to more complex builds with landings, open risers, or custom railing configurations. Material choices, finish work, and whether flooring transitions need addressing alongside the stairs all drive cost in different directions. Every job is different, contact Hundredfold Services for an accurate estimate.

What a Full Staircase Build Actually Covers

There's more to a staircase job than cutting treads and calling it done.

  1. 01

    Structural Assessment

    Before any new treads go down, the existing framing or new opening gets checked. A staircase that wobbles six months later almost always traces back to a framing problem that wasn't caught at the start.

  2. 02

    Stringer and Tread Installation

    The stringers carry the load. They're cut to exact rise-and-run specs, set level, and fastened properly into the structure. Treads are fitted tight with no gaps that collect noise or flex underfoot.

  3. 03

    Railing and Baluster Work

    Newel posts get anchored into the framing, not just the subfloor. Balusters are spaced to code. Handrail height and grip diameter matter for daily use, not just inspection.

  4. 04

    Finish and Transition Details

    Where the staircase meets installed flooring on the upper or lower landing, the transition gets handled cleanly. If paint or stain is part of the scope, that's coordinated before the job closes out.

How It Works

Simple Process, No Surprises

  1. 01

    Call and Describe the Job

    Tell Dominique what you've got: new construction opening, full replacement, partial repair, or something more specific. A phone conversation usually narrows the scope faster than a form.

  2. 02

    On-Site Assessment

    Every staircase job gets looked at in person before anything is priced. Framing conditions, ceiling height, traffic patterns, and material preferences all factor into what gets proposed.

  3. 03

    Build and Finish

    The work gets done by Dominique directly. No subcontractors, no crews you've never met. When the job's done, the site is cleaned up and the stairs are ready to use.

Good to Know

Staircase Cost Factors Worth Understanding

Cost varies more on staircase jobs than almost any other interior build.

01

Material Selection

Oak, pine, poplar, metal accents, cable railing, each combination changes the price. Solid hardwood treads cost more than finger-jointed pine, and that difference compounds across a full flight.

02

Configuration Complexity

A straight single-flight stair is the simplest build. L-shaped stairs with a landing, winders, or open-riser designs all add time and precision to the cut-and-fit work.

03

Existing Conditions

Replacing a staircase in an older home sometimes means dealing with framing that wasn't built to today's standards. What's behind the drywall changes the scope.

04

Finish Scope

Whether treads get sanded and stained, painted, or left raw for carpet matters. If paint touch-ups to adjacent walls and trim are part of the job, that's factored in separately.

05

Railing Style

A simple wood railing with square balusters is faster to build than a wrought-iron baluster layout with a curved handrail. Both are doable. The difference shows up in labor time.

06

Access and Layout

Tight stairwells, low ceilings overhead, or cramped landings make the work harder. That's not an excuse to charge more arbitrarily, but it's an honest factor in any real estimate.

When to Replace vs. Repair Your Staircase

material selection work, professional service in Austin, TX
Not every staircase problem needs a full replacement. Squeaky treads, loose balusters, a wobbly newel post, or a railing that's come loose from the wall are all fixable without tearing out the whole structure. If the stringers are sound and the overall geometry is right, home repair to individual components often makes more sense than a complete rebuild. Honestly, the cases where full replacement is the right call usually involve structural rot, a staircase that was built undersized for the opening, or a complete aesthetic overhaul as part of a renovation. If you're not sure which category your situation falls into, a site visit is the fastest way to get an answer. Dominique will tell you what it actually needs, not what generates the bigger job.

What Hundredfold Services Brings to a Staircase Job

One person handles it. That matters more than most homeowners expect.

Owner-operated
Dominique Willis is the one who shows up, assesses, and builds, not a dispatch crew.
Straight scope conversations
If a repair is the right call, that's what gets recommended, not a full replacement.
Covers related work in one visit
Stair work often connects to flooring, trim, and paint, all handled under one job.
No subcontracting
The person you talk to on the phone is the person holding the saw on your job site.

Ready to Fix or Build Your Staircase?

Call (318) 348-4317 Call to Book Your Repair

Frequently asked questions

What is the average cost to install a new staircase?
Installation cost depends heavily on stair type, material, and configuration. A basic single-flight wood staircase in a residential home typically costs less than a custom open-riser build with hardwood treads and metal balusters. The gap between a simple job and a complex one can be significant. Every job is different, contact Hundredfold Services for an accurate estimate based on your actual opening and material selections.
How long does staircase construction and installation typically take?
A straightforward single-flight replacement can often be completed in one to two days if framing conditions are clean and materials are on hand. More complex builds with landings, custom railing work, or non-standard configurations take longer. Jobs that involve related finish work, staining, painting, flooring transitions, add time on the back end. A site visit gives you a realistic timeline before anything starts.
What is the difference between open-riser and closed-riser stairs, and does it affect cost?
Closed-riser stairs have a vertical board (the riser) filling the gap between each tread. Open-riser stairs leave that space empty, which gives a more modern look but requires more precise tread and stringer work since there's nothing to hide gaps or misalignment behind. Open-riser builds generally take more time to cut and fit cleanly, which affects labor. Material cost depends on what you choose for the treads.
Can a staircase be added to a home that didn't have one in that location before?
Yes, but it requires an opening in the floor above and appropriate structural support around the framing. That's not a DIY-friendly scope for most homeowners. Before any stair build into a new opening, the framing conditions need to be verified, and depending on the project, related work like electrical work routing around the new opening may factor in. Dominique assesses the full scope on-site before quoting.
What wood species are typically used for stair treads, and does species matter?
Oak is the most common choice for residential stair treads in North Texas homes because it's hard enough to handle daily foot traffic without denting easily. Pine is cheaper but softer and shows wear faster in high-traffic spots. Poplar takes paint well if you're going for a painted stair look. Exotic species like hickory or walnut cost more and look distinctive but require the same installation process. Species choice matters for durability and finish, not just appearance.
Does staircase installation require a permit?
In most Dallas-area municipalities, structural work on a staircase opening or a new stair build into a floor opening does require a permit. Replacing treads and railings on an existing staircase within the existing footprint is generally considered repair or replacement and may not trigger a permit requirement. Requirements vary by city and project scope. It's worth a call to your local building department before the work starts to confirm what applies to your specific job.

Related